Zebra TC22R RFID Handheld Reader

Zebra TC22R is an integrated Android RFID handheld reader for asset tracking, inventory counting, item finding and verification workflows.

  • Up to 1,300 tags / sec RFID read rate
  • SE4710 1D/2D scan engine, NFC and 16 MP / 5 MP cameras
  • Wi-Fi 6E, Bluetooth 5.2, 6 GB RAM / 64 GB Flash
TC22R RFID handheld reader in a retail stocktake workflow

RFID Handheld Reader

Zebra TC22R RFID Handheld Reader

Integrated Android RFID handheld reader for asset tracking, inventory counting and verification workflows.

Product Overview

Where TC22R fits in RFID workflows

The Zebra TC22R is an integrated Android RFID handheld reader that combines a TC22 mobile computer, UHF RFID reading, 1D/2D scanning, cameras and NFC in one handheld device. It suits retail, warehouse, logistics, government and light manufacturing teams that need inventory cycle counting, asset tracking, item finding, inbound/outbound verification and document management. Compared with pairing a mobile computer with an external RFID sled, TC22R focuses on a simpler all-in-one workflow, fewer pairing steps, lower fatigue in extended handheld use and Android deployment that can be managed through mainstream MDM platforms. Selection should still confirm RFID tags, read range, regional frequency, Wi-Fi coverage, charging cradles and WMS / ERP / POS workflow requirements.


Quick Fit

Quick fit check

Good fitRFID stocktaking, item finding or asset tracking with Android apps, barcode scanning and Wi-Fi workflows.
Confirm firstTags, materials, read angles, regional frequency, WMS / ERP / POS integration and cradle configuration.
May not fitBarcode-only workflows, no RFID tags, or fixed-reader checkpoints should compare other device types.

Scenarios suited to TC22R

  • Frontline teams need handheld RFID counting for extended periods.
  • The workflow needs RFID, 1D/2D barcode, camera and NFC capture in one device.
  • The business wants Android / MDM-based deployment and management.

Compare before ordering

  • Only short-range POS barcode scanning is required.
  • RFID reading is fixed at portals, conveyor points or gates.
  • Your handheld fleet is already standardised and may only need an RFID sled.


Key Features

Confirmed feature set

Integrated RFID handheld design

Combines the Android mobile computer and RFID reader in one device, avoiding a separate paired reader.

Up to 1,300 tags/sec

The Zebra spec sheet lists a maximum RFID read rate of up to 1,300 tags / sec.

80 ft / 24.4 m nominal read range

The integrated antenna has a nominal RFID read range of 80 ft / 24.4 m.

SE4710 1D/2D scan engine

The same device can support RFID work and common 1D/2D barcode scanning.

6-inch FHD+ touch display

1080 x 2160, 450-nit display for app forms, task lists and stocktaking screens.

Wi-Fi 6E / Bluetooth 5.2

Supports Wi-Fi 6E, 2×2 MU-MIMO and Bluetooth 5.2 for enterprise connectivity.

IP65 and 5 ft drop

Suitable for operational sites that need a more durable handheld device.

7,000 mAh battery

Removable 7,000 mAh battery with PowerPrecision+ battery metrics.


Applications

Common applications

Retail and hospitality

Inventory cycle counting, mobile POS / line-busting and item finding.

Warehouse and logistics

Receiving, shipping, loading verification and inbound/outbound verification.

Light manufacturing

Product and component tracking and work-in-progress verification.

Government and office assets

Asset, document, equipment and check-in/check-out tracking.


Compatibility

Accessories, software and system fit

When buying TC22R, review charging cradles, screen protectors, USB-C cables, power supplies, line cords, Zebra OneCare services, MDM management, RFID tags and existing WMS / ERP / POS app workflows together.

Selection Guide

Four checks before selection

1

Confirm RFID tags

Share tag type, size, surface material and expected read distance.

2

Confirm site and frequency

Regional RF output and frequency rules differ; Hong Kong projects should be checked against the supplied configuration.

3

Confirm app workflow

List WMS, ERP, POS, MDM or current Android app requirements.

4

Confirm charging and protection

Select single-slot or multi-slot cradles, screen protectors and service options based on fleet size.


Compare

TC22R compared with nearby choices

Choice Positioning Best fit
TC22R Integrated RFID handheld reader Standard range RFID, SE4710, Wi-Fi 6, 6GB / 64GB, 7,000mAh battery
TC22 / TC27 Mobile computer Barcode, app workflow and mobile data capture without integrated UHF RFID reader
RFD40 with compatible mobile computer RFID sled workflow Useful when teams already standardise on compatible handhelds and want sled-based RFID

Buying Pitfalls

Common buying pitfalls

Reading only the range figure

RFID performance depends on tag, material, angle, interference and output limits. Review it against site testing and tag specification.

Ignoring charging accessories

Fleet deployments need cradle, power supply, line cord and spare charging workflow planning.

Not confirming the app process

Android, MDM, WMS / ERP / POS fields and scanning logic should be checked before hardware rollout.


Why Easy Scan

Why enquire through Easy Scan?

As a Zebra Premier Solution Partner, Easy Scan can help Hong Kong businesses review TC22R against RFID tags, read range, handheld configuration, charging accessories, Android / MDM management and existing system workflows, reducing the risk of ordering a device without the matching accessories or process requirements.

Specifications

TC22R specifications

The following is based on Zebra TC2xR Series specifications and should be checked against the supplied configuration before ordering.

Product family TC22R Integrated Handheld RFID Reader
Product category Integrated RFID handheld reader / Android mobile computer
Primary workflows Asset tracking, inventory cycle counting, item finding, inbound/outbound verification, document management and light manufacturing tracking
Dimensions 5.7 in. H x 3.3 in. W x 6.96 in. L / 14.5 cm H x 8.4 cm W x 17.7 cm L
Weight 20.07 oz. / 569 g
Display 6.0 in. Full High Definition+ colour display, 1080 x 2160, LED backlight, 450 nits
Touch panel Multi-mode capacitive touch with bare or light gloved fingertip input
Power User-removable, quick-release 7,000 mAh Li-Ion battery with PowerPrecision+
Network connections WLAN, WPAN
Notifications / indicators Audible tone, vibration, decode LEDs, battery status LED and beeper
Keypad / input On-screen keypad; programmable scan / PTT button; volume, power and tri-function trigger
Interface ports USB 3.1 bottom Type C, SuperSpeed, host and client
CPU 5430 hexa-core 2.1 GHz
Operating system Android; supported versions depend on Zebra's Android versions guidance
Memory 6 GB RAM / 64 GB Flash
RFID standards EPC Class 1 Gen 2; EPC Gen 2 V2
RFID engine Zebra Proprietary Radio Technology
Maximum RFID read rate Up to 1,300 tags / sec
Gen2X Supports Gen2X industry communications standard
Nominal RFID read range Integrated antenna: 80 ft. / 24.4 m
Frequency range and RF output US 902-928 MHz; EU 865-868 MHz; 916.3 / 917.5 / 918.7 MHz; AUS 920-925 MHz; output depends on regional rules
Scanning SE4710 1D/2D scan engine
Camera Forward-facing 16 MP camera; front-facing 5 MP camera
NFC NFC ISO 14443 Type A/B, Mifare, FeliCa, ISO 15693, NFC Forum tags 2/3/4/5, Host Card Emulation and Contactless Payment Support
Bluetooth Bluetooth Class 2, Bluetooth v5.2
WLAN IEEE 802.11a/b/g/n/ac/d/h/i/r/k/v/w/mc/ax; 2×2 MU-MIMO; Wi-Fi 6E; Dual Band Simultaneous; IPv4 / IPv6
WLAN data rates 6 GHz / 5 GHz up to 2,402 Mbps; 2.4 GHz up to 286.8 Mbps
Fast roam PMKID caching; Cisco CCKM; 802.11r; OKC
Wi-Fi security WEP, Enhanced Open, WPA/WPA2/WPA3 Personal, WPA/WPA2/WPA3 Enterprise and EAP options
Operating temperature 14°F to 122°F / -10°C to +50°C
Storage temperature -40°F to 158°F / -40°C to +70°C
IP sealing IP65
Humidity 5-95% non-condensing
Electrostatic discharge +/-15 kV air discharge; +/-8 kV direct discharge
Tumble specification 500 cycles / 1,000 drops, 1.6 ft. / 0.5 m at room temperature
Drop specification Multiple 5 ft. / 1.5 m drops to concrete

FAQ

FAQ

Is TC22R suitable for warehouse stocktaking?

Yes, when the workflow uses RFID tags for faster counting, item finding or inbound/outbound checks. Please share tag type, shelving environment, read distance and system workflow for review.

Can TC22R replace a normal barcode scanner?

Not always. TC22R can scan 1D/2D barcodes, but its main value is RFID asset tracking. If you only need short-range barcode scanning, compare standard mobile computers or scanners.

Will RFID reading always reach 80 ft?

No. 80 ft / 24.4 m is the Zebra-listed nominal read range. Actual performance depends on tag, material, angle, environment and regional output limits.

Enquiry

Ask about Zebra TC22R RFID handheld reader

Share your RFID tags, workflow, device quantity and system process so Easy Scan can help review TC22R configuration and accessories.

Brand

Zebra

Product Type

RFID handheld reader

Series

TC2xR Series

Model

TC22R

RFID Reader

Integrated UHF RFID reader

Barcode Scan Engine

SE4710 1D / 2D scan engine

Connectivity

Wi-Fi 6E, Bluetooth 5.2, NFC

Battery

7,000 mAh removable battery

Suitable Application

RFID inventory counting, asset tracking, item finding, inbound / outbound verification and document management

Part Number

Use the following information as a reference when checking configuration. Actual sellable models may vary by region, configuration and supply arrangement; please confirm with Easy Scan before ordering.

TC22R Integrated Handheld RFID Reader

Part Number Description
TC2205-0G1250SS-WR TC22R Integrated Handheld RFID Reader, Gun, Wi-Fi 6, Android GMS, SE4710 + FF/FF Cameras + Standard Range RFID, 6GB | 64GB, Standard 7,000mAh Battery, 900MHz Worldwide

Accessories / Services

Confirm cradles, screen protection, power accessories and service arrangements together to avoid missing key deployment items.

Charging, cradle and protection

Part Number Description
CRD-TC2R-BS1CG-01 SINGLE-SLOT CHARGE-ONLY CRADLE FOR TC22R, Requires USB-C cable (CBL-TC5X-USBC2A-01) and Country Specific Power Supply (PWR-WUA5V12W0xx)
CRD-TC2R-BS4CG-01 MULTI-SLOT (4) CHARGE-ONLY CRADLE FOR TC22R, Requires Power Supply (PWR-BGA12V108W0WW), DC Cable (CBL-DC-382A1-01), and Country Specific Line Cord
CRD-TC2R-SE4ET-01 MULTI-SLOT (4) CHARGE & COMMUNICATION CRADLE FOR TC22R, Requires Power Supply (PWR-BGA12V108W0WW), DC Cable (CBL-DC-382A1-01), and Country Specific Line Cord
CRDCUP-TC2R1U-01 REPLACEMENT CHARGE-ONLY CRADLE CUP FOR TC22R MULTI-SLOT CRADLES, Requires Cradle Base, Power Supply, Line Cord
CRDCUP-TC2R2E-01 REPLACEMENT CHARGE AND COMMUNICATION CRADLE CUP FOR TC22R MULTI-SLOT CRADLES, Requires Cradle Base, Power Supply, Line Cord
SG-TC2R-SCRNPT1-01 TEMPERED GLASS SCREEN PROTECTOR FOR TC22R

Selected service options

Part Number Description
Z1AE-TC22RX-3100 3 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, std maintenance for std battery
Z1AE-TC22RX-3103 3 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, std maintenance for std battery, std commissioning, MOQ 20
Z1AE-TC22RX-3300 3 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, premium maintenance for std battery
Z1AE-TC22RX-3303 3 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, premium maintenance for std battery, std commissioning, MOQ 20
Z1AE-TC22RX-3C00 3 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive
Z1AE-TC22RX-3C03 3 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, std commissioning, MOQ 20
Z1AE-TC22RX-4100 4 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, std maintenance for std battery
Z1AE-TC22RX-4103 4 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, std maintenance for std battery, std commissioning, MOQ 20
Z1AE-TC22RX-4300 4 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, premium maintenance for std battery
Z1AE-TC22RX-4303 4 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, premium maintenance for std battery, std commissioning, MOQ 20
Z1AE-TC22RX-4C00 4 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive
Z1AE-TC22RX-4C03 4 yr Z1C Essential TC22R, 3 day TAT, purchased in 30 days, comprehensive, std commissioning, MOQ 20

Resources

Certificates

Easy Scan can help review TC22R against Zebra product information, accessories, documents and Hong Kong B2B deployment needs.


View certificate page

Video

The videos below help explain the TC22R RFID handheld reader and RFID fundamentals.

FAQ

How is TC22R different from TC22?

TC22R is an integrated RFID handheld reader, while TC22 is a mobile computer. If the workflow needs UHF RFID inventory or asset tracking, review TC22R.

Do I need a separate RFID sled?

TC22R is an integrated RFID reader, so it does not need a separate RFID sled for TC22R use. You should still confirm cradles, protection and system workflows.

Can TC22R scan barcodes?

Yes. The Zebra spec sheet lists an SE4710 1D/2D scan engine. If you only need barcode scanning, compare standard mobile computers or scanners too.

What frequency details matter for Hong Kong projects?

RFID frequency and RF output depend on regional rules. Share the deployment region and expected tag specification so the suitable configuration can be checked.

What information is useful for quotation?

Share device quantity, RFID tag type, read distance, workflow, cradle needs and whether MDM / WMS / ERP / POS integration is involved.

Can it work with an existing WMS or ERP?

It depends on the current system, app, API or import workflow. TC22R provides the hardware and Android platform; the system process should be reviewed separately.

Leave Your Message

    Go to Top